Palmo Industrial Silicones Pvt. Ltd.
Silicone Emulsion – For Rubber Industry
Application : These Emulsions are made for special applications for Rubber and Rubber Product Manufacturers. The total dissolved solids of this emulsion do not fall below 25% and exceed 50% approx depending on users required and the rubber product. These dissolved solids enable the user industry to dilute the emulsions with water or distilled water to suit their solubility convenience or to their set of norms defined by them.

These Emulsions are easy to use and are harmless to human beings. The emulsion is normally brushed or sprayed with the help of insecticide sprayers at an interval of approximately 3 or 4 releases of the molded rubber. They are directly sprayed on the moulds to remove the carbon or rubber sediments on the interiors of the mould. The properties of this Silicone Emulsion will enhance the gloss of the end property, are released from the mould. By using this emulsion the mould life will not be disturbed and would help in maintaining the wall thickness on the interiors of the mould.

Properties :
Total Dissolved Solids : Not less than 25%
Other Specifications :  
Contents dissolve solides are in the range of 25% to 50 % maximum
pH is maintained at neutral
Soluble in water (Solubility to be used as per norms of in house specifications)
Does not separate after continuous stirring for 2 hours at 104o C.
Temperature stability is 0o C to + 120o C
Does not contain any harmful chemicals and hence recommended for manual handling also
Copyright © 2002 Palmo Industrial Silicones Pvt. Ltd.,
Website Design by VCAN Technologies